Monday, 9 December 2013

Kids Fairytale Messenger Bag Tutorial

To make the messenger bag that was offered in the Sew Mama Sew Giveaway Day is really simple, just follow the steps below (no pattern needed).

You will need a main fabric, a lining fabric, heavyweight fusible interfacing, 2 x D Rings, 2 x Trigger Clasps and a magnetic clasp.

Cut Your Fabric

From Main Fabric

Cut  3 panels measuring 10 1/2" x 8 1/2"  (one is for flap) front/back panel

2 panels measuring 8 1/2" x 3" (sides)

1 panel measuring 10 1/2" (bottom)

1 strip measuring 29" x 4" (handle)

2 strips of main fabric for attaching D Rings 3"x 3"

Cut the same from lining fabric apart from the long strip for the handle.



Fuse interfacing to the wrong side of the main fabric (not the handle).

Stitch the side panels (right sides together) to either end of the bottom panel to make a long strip.

Attach the magnetic stud to the front panel 2" from the top of the panel and centred, following the manufacturers instructions.


With right sides together stitch the main fabric front flap to the lining front flap around 3 sides leaving the top of the flap open for turning. Turn and press.

Attach other half of the clasp to the front flap, placed 2 1/2" from bottom of flap and centred.

With right sides together stitch the sides and bottom to front panel, pivot at corners. Attach back panel.

Repeat with lining fabric for main bag body but leave a gap along the bottom seam measuring approx 4 - 5 inches for turning.. You should have 1 flap and 2 main bag bodies as of pic on right.

Line up the raw edges of the flap with the back of the back (right sides together) and tack in place.

Take the 2 small strips to make D ring holders. Fold each one in half and press, open out then fold each edge towards centre crease (wrong sides together) and press, fold in half and press again. Stitch down long edge to make 2 strips. Slip a D ring on each one and tack to each side panel with raw edges matching.



Turn main bag body right side out and place it inside the lining main bag body which is still wrong side out. Line up side seams and around the top. The flap is now sandwiched between the main bag bodies.  Like the flap, the D ring strips will be sandwiched between the main fabric and the lining fabric.

Tack all around top edge then machine stitch together.

Pull bag through gap in lining G E N T L E Y until bag is right sides out.

Press and top stitch all around the top edge, hand stitch gap in lining fabric closed.


Looking inside bag showing raw edges matching.








Showing D Rings tucked inside raw edges lined up.



Finished Bag!!


Unfortunately I forgot to photo the process of making the bag handle but its basically a really long version of the D Ring strips.

Fold handle in half wrong sides together and press. Open out and fold each long edge towards the centre and press again. Keeping the edges folded in, fold entire strip in half length ways and press. Stitch down each long edge, folding in raw edges at each end. Slip trigger clasp on strap, fold fabric over D Ring of trigger clasp and machine stitch firmly in place, repeat with other end of strap.

If you have any problems leave a message in the comments box and I will get back to you as soon as I can. Good luck and please post photos of your finished creations!!


3 comments:

  1. Hello, thanks for your comment on my blog for the sewmamasew giveaway! Although I have your e-mail I hope you know that you are a no-reply blogger. Here's a link to my blog to read and see how this is fixed.
    http://ariadnefromgreece.blogspot.gr/2013/12/wordless-wednesday-and-no-reply-blogger.html
    AriadnefromGreece!

    ReplyDelete
  2. sweet tutorial, great pics and explanation. love the fabric choice. do you know who makes it?

    ReplyDelete
    Replies
    1. Thanks, fabric still available at Ikea x

      Delete

I love to read your comments